19
2. ADVANCED OPERATIONS
Operating RTTY (FSK) (Continued)
D Transmitting an RTTY memory content
You can transmit the preset characters on the RTTY
MEMORY screen.
L You can edit the characters by touching [EDIT] on the
RTTY MEMORY screen.
1. Display the RTTY DECODE screen in the RTTY
mode.
L The PSK mode screen differs slightly from the
RTTY mode.
2. Touch [TX MEM].
Memory
Title Preset characters by default
RT1 MYCALLx2
↵ DE ICOM ICOM K ↵
RT2 MYCALLx3
↵ DE ICOM ICOM ICOM K ↵
RT3 QSLUR599
↵ QSL UR 599–599 BK ↵
RT4 DE+UR599
↵ QSL DE ICOM ICOM UR 599-
599 BK ↵
RT5 73 GL SK
↵ 73 GL SK ↵
RT6 CQ CQ CQ
↵ CQ CQ CQ DE ICOM ICOM
ICOM K ↵
RT7 RIG&ANT
↵ MY TRANSCEIVER IS IC
-
7610
& ANTENNA IS A 3–ELEMENT
TRIBAND YAGI. ↵
RT8 EQUIP.
↵ MY RTTY EQUIPMENT
IS INTERNAL FSK UNIT &
DEMODULATOR OF THE IC-7610. ↵
» DECODE
3. Touch an RTTY memory between [RT1] and
[RT8] to transmit.
(Example: RT1)
Transmitting contents are displayed.
Lights red
• The TX status indicator lights red and the Po meter
swings.
L To cancel the transmission and to return to the RTTY
DECODE screen, push
.
LAfter transmitting, automatically returns to receive.
When a keyboard is connected:
• You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) by pushing [F1] ~ [F8] on the
USB keyboard.
After transmitting the contents, you can directly
enter an RTTY message on the keyboard, and
then push [F12] to transmit.
To return to receive, push [F12] again.
• If the Auto TX/RX function is set to “OFF” or
“AUTO RX” (p. 20), you can display the preset
contents on the RTTY DECODE screen, and then
transmit it by pushing [F12] on the keyboard.
• You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from an external device by
setting the “External Keypad,” and then connecting
an external keypad to [MIC] or [EXT KEYPAD] on
the IC-7610.
» SET > Connectors > External Keypad
To Next Page
Loading...
Need help?
General
