5. VOICE TX MEMORY OPERATION
50
Recording a Voice TX memory
You can record up to 8 Voice transmit memories
(T1 ~ T8) of up to one and a half minutes in each
memory, onto an SD card. To transmit a recorded
content using a
message, as described below.
L A user supplied SD card is required to use the
Voice TX memory function.
L You can also transmit the recorded content using
an external keypad.
D Recording
1. Display the VOICE TX screen in the SSB, AM, or
FM mode.
»
VOICE
2. Touch [REC/SET].
5. Touch and speak into the microphone
without holding down [PTT] to start recording.
InformationL
• You can record up to one and a half minutes in
each memory.
• The previously recorded content is overwritten.
6. Touch
to stop recording.
7. To close the VOICE TX screen, push
several times.
TIP: How to clear the recorded content
Touch the Voice memory for 1 second in step 4 to
display the Quick menu, and then touch “Clear.”
4. Touch “ ” of the TX memory.
(Example: T1)
3. Touch “ REC.”
• The VOICE TX RECORD screen is displayed.
Touch to open the MIC
GAIN adjustment window
Displayed while
recording
Displays the input
audio level
Adjust the Mic gain so that the “REC
Level” meter does not reach 80%
D Playing back
z On the selected memory’s recording screen, touch
to start playing back.
LTo stop the playback, touch .
Displayed while playing back
To Next Page
Loading...
Need help?
General
