64
7. MEMORY OPERATION
Clearing a memory channel
You can clear a no-longer-used memory channel and
reset it as a blank channel, except for the program
channels (P1 and P2).
1. Select the Main band or Sub band.
(Example: Main band)
2. Select the Memory mode.
3. Rotate
to select the channel to clear.
(Example: Memory channel 3)
4. Touch [M-CLR] for 1 second.
The memory channel to clear
Cleared
5. To close the VFO/MEMORY screen, push
.
About the MEMORY screen
t
wq e r
q Memory channel number
Displays the memory channel number.
L “P1” or “P2” is displayed for the Scan Edge
memory channels.
Memory select icon
Touch this icon to set the select number “1,”
“2,” “3” or OFF.
L You can also touch the icon for 1 second to display
the SELECT ALL CLEAR screen, and then select the
item to reset the select number.
w
Displays the entered frequency, selected operating
e Memory name
Displays the memory name, if entered.
LSee the previous for details.
r Memory menu
Touch to display the MEMORY MENU.
L You can select between “Edit Name,” “Memory Write”
and “Memory Clear”.
t
Touch to scroll through the Memory channels.
About the QUICK MENU
While selecting a memory channel with memory
contents, push
to display the QUICK MENU,
where you can select “SELECT,” “Edit Name,” “Memory
Write,” “Memory Clear,” and “SELECT All Clear.”
To Next Page
Loading...
Need help?
General
