Inovance SV660N User Manual

7
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
6 INODRIVERSHOP
InoDriverShop is the commissioning and diagnostic tool for SV660N drives series. This document explain the
InoDriverShop version v3.2.1.1
6.1 INSTALL AND EXECUTE INODRIVERSHOP
This program does not need to be installed. Unzipping the file in a folder on your computer is enough to run it.
Once the file has been decompressed in the resulting folder, the executable InoDriveShop appears. Executing
this file opens the user environment.
6.2 CREATE A NEW PROJECT
To create a new project, click on the new project icon or the command from the start screen:
The corresponding dialog to select the type of drive is show. It is possible to create a new project online or
offline. The offline project allows you to create a project without being connected to the computer.
If you connect with the drive, select the appropriate communication parameters. Connect the servo drive and
the PC by using the PC communications cable.
The default parameters of the SV660N are:

Inovance SV660N Specifications

General

Brand	Inovance
Model	SV660N
Category	Servo Drives
Language	English