Intel S2600CP Family User Manual

Appendix F: POST Error Code Intel
®
Server Board S2600CP and Server System P4000CP TPS
Revision 1.1
Intel order number G26942-003
198
Appendix F: POST Error Code
Most error conditions encountered during POST are reported using POST Error Codes. These
codes represent specific failures, warnings, or informational messages that are identified with
particular hardware units. These POST Error Codes may be displayed in the Error Manager
display screen, and are always automatically logged to the System Event Log (SEL). Being
logged to SEL means that the error information is available to System Management applications,
including Remote and Out of Band (OOB) management. The table below lists the supported
POST Error Codes, with a descriptive Error Message text. for each. There is also a Response
listed, which classifies the error as Minor, Major, or Fatal depending on how serious the error is
and what action the system should take. The Response section in the following table indicates
one of these actions:
 Minor: The message is displayed on the screen or on the Error Manager screen, and an
error is logged to the SEL. The system continues booting in a degraded state. The user
may want to replace the erroneous unit. The POST Error Pause option setting in the
BIOS setup does not have any effect on this error.
 Major: The message is displayed on the Error Manager screen, and an error is logged
to the SEL. The POST Error Pause option setting in the BIOS setup determines whether
the system pauses to the Error Manager for this type of error so the user can take
immediate corrective action or the system continues booting.
 Fatal: The system halts during post at a blank screen with the text “Unrecoverable
fatal error found. System will not boot until the error is resolved” and “Press <F2>
to enter setup” The POST Error Pause option setting in the BIOS setup does not have
any effect with this class of error.
Table 155. POST Error Codes and Messages
Error Code Error Message Response
0012 System RTC date/time not set Major
0048 Password check failed Major
0140 PCI component encountered a PERR error Major
0141 PCI resource conflict Major
0146 PCI out of resources error Major
0191 Processor core/thread count mismatch detected Fatal
0192 Processor cache size mismatch detected Fatal
0194 Processor family mismatch detected Fatal
0195 Processor Intel(R) QPI link frequencies unable to synchronize Fatal
0196 Processor model mismatch detected Fatal
0197 Processor frequencies unable to synchronize Fatal
5220 BIOS Settings reset to default settings Major
5221 Passwords cleared by jumper Major
5224 Password clear jumper is Set Major
8130 Processor 01 disabled Major
8131 Processor 02 disabled Major
8132 Processor 03 disabled Major
8133 Processor 04 disabled Major
8160 Processor 01 unable to apply microcode update Major

Intel S2600CP Family Specifications

General

Brand	Intel
Model	S2600CP Family
Category	Server Board
Language	English