Intel® Server Board S2600CP and Intel® Server System P4000CP Platform Management
Intel® Server Board S2600CP and Server System P4000CP TPS
Revision 1.1
Intel order number G26942-003
62
Figure 28. Integrated BMC Hardware
6.2 Server Management Functional Specifications
6.2.1 BMC Internal Timestamp Clock
The BMC maintains an internal timestamp clock that is used by various BMC subsystems, for
example, for time stamping SEL entries. As part of BMC initialization after AC power is applied
or the BMC is reset, the BMC initializes this internal clock to the value retrieved from the SSB
component’s RTC by a SMBus slave read operation. This is the system RTC and is on the
battery power well so it maintains the current time even when there is no AC supplied to the
system.
6.2.1.1 System Clock Synchronization
The BIOS must send the Set SEL Time command with the current system time to the BMC
during system Power-on Self-Test (POST). Synchronization during very early POST is preferred,
so that any SEL entries recorded during system boot can be accurately time stamped.
Additionally, during sleep state transitions other than S0 the BIOS will synchronize the time.
If the time is modified through an OS interface, then the BMC’s time is not synchronized until the
next system reboot.
To Next Page
Loading...
Need help?
General
