Chapter 8: Regulations
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 303
Refer to appropriate sections and manuals.
Caution: When any option, any additional function or any additional zone type in
this section does not comply with the EN 50131 requirements, the EN 50131
Grade 2 label must be removed from the system.
Additional functions
The Wireless PIR Camera functionality brings along video verification feature,
this additional function is fully available without compromise to standards the
system complies to.
The Wireless PIR camera system consists of the following:
• Advisor Advanced series control panel
• ATS1238 Advanced Wireless DGP
• TX-2344-03-1 Wireless PIR Camera
• ATS7310 GSM/GPRS Module
These PIR camera settings have no influence on EN 50131 compliance:
• 2.2.2.n.4.9.1.1.2 Frame rate for all event types
• 2.2.2.n.4.9.1.1.3 Pic resolution for all event types
• 2.2.2.n.4.9.3 Pic auto deletion
• 4.5 Cameras
• 9.1.n.4.5 Vid dest port
• 9.3.n.10 Max Pics 24h, 9.3.n.7.9 Max Pics 24h
EN 50131 Grade 3
Required settings
The following options and values are mandatory for EN 50131-1 Grade 3
regulations:
• All Grade 2 required settings (see “EN 50131 Grade 2” on page 302).
• PIN length should be 6 digits minimum. See also “8.7.4 PIN length”.
• 3.2.n.6 User group options, set (6) Isolate, (22) SMS reporting, (23) SMS
control to No for all user groups except Installer.
• 4.1.n.6.7 Anti mask, set to Yes for all I&HAS movement detectors
• 8.1.3.1 Armed display, set to 00’00
• 8.3.5 View EE timer, set to Off
• 8.4.1 RTS options, set Zone masking condition to Yes
• 8.4.2 Inhibit includes, set Zone masking condition to Access Level 2
• Battery test should be performed daily. See “1.2.9 Battery test” on page 135
for details.
The following features are not allowed (not evaluated):
• Keyswitch zone types to set and unset the system. See “Zone types” on page
45.
• Presetting indication and any automatic override of set prevention.
To Next Page
Loading...
Need help?
General
