Chapter 3: System functions
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 61
There is always one installer in the system. More than one user can have rights
that allow granting access to the installer or service engineer.
See also “User groups” on page 62.
User data lock
When a system is configured as EN 50131 compliant, you are not allowed to
modify settings for an existing user (other than yourself). A new user can be
configured only when added, and an existing user can only be removed. The
installers can only modify their own settings, and the other users can modify their
own settings via user menus (see Advisor Advanced User Guide and Advisor
Advanced Manager Manual for more details).
After a new user is added via menu “3.1.0 Add user” on page 162, the installer
can configure this user. After the modification is done and the installer exits from
the user menu, the following confirmation request appears:
Choose OK to confirm the new user configuration. After confirmation only this
user is able to modify own settings.
Otherwise, choose Cancel to return to the user configuration.
To Next Page
Loading...
Need help?
General
