Inspection
8
2. INSPECTION
● Don’t install or use any inverter that is damaged or have fault part, otherwise
may cause injury.
Check the following items when unpacking the inverter,
1. Inspect the entire exterior of the Inverter to ensure there are no scratches or other
damage caused by the transportation.
2. Ensure there is operation manual and warranty card in the packing box.
3. Inspect the nameplate and ensure it is what you ordered.
4. Ensure the optional parts are what you need if have ordered any optional parts.
Please contact the local agent if there is any damage in the inverter or optional parts.
CAUTION
To Next Page
Loading...
Need help?
General