Goodrive350-19 series VFD Technical data
-488-
All models (with external EMC filters)
Maximum motor cable length (m)
Environment category II (C3)
Environment category I (C2)
You can learn the maximum length of the motor cable through the running parameters of the VFD. To
understand the accurate maximum cable length for using an external EMC filter, contact the local
INVT office.
For description about the environments categories I (C2) and II (C3), see section "EMC regulations".
B.5 Application standards
The following table describes the standards that the VFDs comply with.
Safety of machinery––Safety-related parts of control systems––Part
1: General principles for design
Safety of machinery––Electrical equipment of machines. Part 1:
General requirements
Safety of machinery––Safety-related functional safety of electrical,
electronic, and programmable electronic control systems
Adjustable speed electrical power drive systems––Part 3:EMC
requirements and specific test methods
Adjustable speed electrical power drive systems––Part 5-1: Safety
requirements—Electrical, thermal and energy
Adjustable speed electrical power drive systems––Part 5-2: Safety
requirements––Function
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 1: Technical conditions
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 2: Test methods
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 3: Safety regulations
B.5.1 CE marking
The CE marking on the VFD nameplate indicates that the VFD is CE-compliant, meeting the
regulations of the European low-voltage directive (2006/95/EC) and EMC directive (2004/108/EC).
To Next Page
Loading...
Need help?
General