Goodrive350-19 series VFD Safety precautions
- 1 -
1 Safety precautions
1.1 What this chapter contains
Read the manual carefully before moving, installing, running and servicing the VFD, and follow all
safety precautions contained. Otherwise, device damage or personal injury or even death can result.
We are not liable or responsible for any device damage or personal injury or death caused by you or
your customers due to your ignorance of the safety precautions.
1.2 Safety definition
Danger: Severe personal injury or even death can result if related requirements are not followed.
Warning: Personal injury or device damage can result if related requirements are not followed.
Note: Actions taken to ensure proper running.
Qualified electricians: People working on the VFD must have received professional electrical and
safety training and obtained the certificates, and must be familiar with all steps and requirements of
VFD installing, commissioning, running and maintaining and capable to prevent any emergencies.
1.3 Warning symbols
Warnings caution you about conditions that can result in severe injury or death and/or device damage
and advice on how to prevent dangers. The following table lists the warning symbols in this manual.
Severe personal injury or even death
can result if related requirements are
not followed.
Personal injury or device damage can
result if related requirements are not
followed.
PCBA board damage can result if
related requirements are not followed.
The VFD base may be hot. Do not
touch.
High voltage may be present in bus
capacitors after power off. To prevent
electric shock, wait at least 5 or 15 or
25 minutes (depending on the VFD
warning symbol) before operating the
VFD that is just powered off.
Read the manual before operating.
Actions to ensure proper running.
To Next Page
Loading...
Need help?
General