INVT Goodrive350-19 Series User Manual

Goodrive350-19 series VFD Commissioning
- 56 -
 If PLC control is used, speed signal and other input and output signal functions need to be
adjusted according to the actual control logic.
 This macro can meet the requirements of most lifting application cases, and the performance
parameters have been optimized and do not need to be adjusted in most cases. If an exception
occurs, see the function parameter chapter for adjustment or contact the technical support.
5.7 Commissioning winching in closed-loop vector control (applicable to
lifting in mineral wells and winches)
5.7.1 Wiring
(+) PB
GD350-19 VFD
R
S
T
R
S
T
U
V
W
PG
PE
S1
S2
S3
S4
COM
Brake output
VFD fault
output
RO1A
RO1B
RO1C
RO2A
RO2B
RO2C
Lifting
Lowering
Fault reset
Upward position limit
Braking resistor
COM
+24V
HDIB
HDIA
M
3~
GND
AI1
+10V
PW
+24V
Figure 5.7 Wiring for winching in closed-loop vector control (recommended analog reference 0V–10V)

INVT Goodrive350-19 Series Specifications

General

Brand	INVT
Model	Goodrive350-19 Series
Category	DC Drives
Language	English