SV-DA200 series AC servo drives Safety precautions
‐III‐
Do install the overcurrent protector, leakage current protector and emergency device and ensure
the normal usage after wiring, otherwise electric shock, hurt and fire may occur.
The leakage current may exceed 3.5mA during the drive running. Do ground with proper
techniques and ensure the grounding resistor is less than 10Ω. The conductivity of PE earth
conductor is the same as the phase conductor (with the same cross area).
The components inside the drive contain heavy metal which should be disposed as industrial
waste.
To Next Page
Loading...
Need help?
General
