SV-DA200 series AC servo drives Communication
ā232āī
Note:
1. All used words and double-words are transmitted by the format of Big-Endian, which means the
high byte or high word will be transmitted and then the low byte or low word.
2. PZD configuration parameters include setting parameters and feedback parameters for the
designated parameter content. The corresponding parameters can be designated by P4.80, P4.81,
P4.82, P4.83, P4.84 and P4.85.
3. GSD is a word file for the identification of PROFIBUS-DP device. GSD file includes the data
information of a DP salve on the standard DP master station. GSD file has vendor information,
supports communication transmission ratio, time information, characters, optional parts and I/O
information as the base of master station parameters. The user can download GSD file on the
company website for networking.
8.5 Upper PC software
8.5.1 ServoPlorer upper pc software
ServoPlorer V4.0 is the PC monitoring and commissioning software of DA200 servo drive with
following functions:
1. Real-time monitoring to the state parameters
2. Online modification of the parameters setting
3. To support USB, 4-channel waveform monitoring, the minimum resolution is 0.125ms
4. Bulk parameters saved to folders and downloaded to servo drives
5. Fault display and fault record reading
6. Multiple independent functional application interfaces (for example: frequency feature test, inertia
identification, program JOG, ECAM, etc.)
8.5.2 Hardware
CPU Above Pentium 4
Internal storage More than 1G
Hard disk More than 512M
Screen resolution More than 1024*768
Communication interface USB1.1
8.5.3 Software
Operation system Windows XP,Vista,Windows7
.NET version .NET Framework 4.0
Excel software Excel2007, 2010 or above
8.5.4 Communication connection
The drive has USB interfaces through which the drive and the computer can be connected. The
communication connection is as the figure below:
To Next Page
Loading...
Need help?
General
