!
Handle all parts extremely carefully .
Never get your hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
Every 25,000 km c heck t he level of oil in the sump with the
dipstick.
The level must be between the max and min marks on the
dipstick.
If necessary, top up with oil of the same type contained in the
sump via the filler (Urania Turbo type of oil)
When fillin g, it is recommended to take out th e
dipstick to help the oil flow into the sump.
!
Handle all parts extremely carefully .
Never get your hands or fingers between pieces.
Wear the required safety cloth ing such as goggles,
gloves, safety shoes and helmet.
Before touching the filters, make sure the engine
temperature is not such as to cause burns.
Engine lubricating oil is harmful: avoid contact with
skin and eyes. In t he event of contac t , wash wit h
plenty of running water.
To change the engine oil filters, proceed as illustrated here.
Before removing the filters, place a tray of
sufficient capacity in a suitable position: each filter
cont ains approximately 1 kg of engine oil.
Figure 1
To remove the engine o il filters (2) u se tool 99368538 (1).
NOTE
CHECKING/REFILLING ENGINE OIL
FILTERS
CHANGING ENGINE OIL FILTERS
83512
NOTE
84
SECTION 3 - INDUSTRIAL APPLICATION
VECTOR 8 ENGINES
Base - April 2006 Print P2D32V001E
To Next Page
Loading...
Need help?
General
