After positio ning the tool (1) 99360091 under the filter,
uns crew and remove the filters (3) and (4) with the aid of a
27 mm wrench (2). Hand screw and tighten for another 3/4
turn. Unscrew the air jets nozz le on filters support and pump
on the manual priming pump. Tighten the air jets nozzle
when the fuel go out.
CHANGING FUEL FILTERS
!
Handle all parts extremely carefully .
Never get your hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
Improper waste disposal is a threat for the
environment. Potentially hazardous waste used on
IVECO vehicles includes lubricants, fuels, coolants,
filters and batteries.
— Use watertight containers when draining off
fluids. Never use containers for foodstuffs or
beverages that can lead people to drink from
them.
— Never throw waste on the ground, on tips or
in water c ou rses.
— Obtain information on the appropriate ways
of recyc lin g or dispo sin g of waste from the
local authorities or c o llect ion centres.
Figure 16
Figure 17
Before disassembling, place under the filter a basin
of suitable capacity.
NOTE
SECTION 3 - INDUSTRIAL APPLICATION
91
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
To Next Page
Loading...
Need help?
General
