Figure 35
Figure 36
Figure 37
Figure 38
- From the inside of the flywheel box prevent flywheel
rotation by using rotation tool 99368502 (1) and fixed
wrench (2). Then loosen screws (3).
- Fit t he supporting tool 99368533 (1) for disassembling
and assembling the flywheel. Go ahead and unscrew the
flywheel fixing screws. Remove washer and engine
flywheel assembly.
- Fit the tool 99368513 (1) a nd extract the rear oil seal (2).
- Unsc rew the screws (1), (2) and (3) after suitably slin ging
the flywheel cover casing (4). Detach the flywheel cover
casing from the crankcase.
103194
103219
82228
103195
NOTE
Mark the position of the screws (1), (2)
Screw s (1): M12x35 mm 6 bolts tot.
Screws (2): M14x90 mm 12 bolts tot.
SECTION 3 - INDUSTRIAL APPLICATION
21
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
To Next Page
Loading...
Need help?
General
