− 27 −
2. Performing sewing using the combination function
By arranging in the order of use of the pattern register (P1 to P50) which have been already registered and
registering in C1 to C20, the sewing pattern will change in the order every time the sewing machine finishes
the sewing. Every one combination No. can be registered up to the maximum 30 patterns.
(1) Register of the combination
Setting example : Combine in the order of P1, P2 and P3, and register them in the C1.
1) Turn ON the power switch and press key
to enter the mode setting (memory switch
setting). (Sewing LED should be put out.)
2) Indicate the combination mode with or
key.
3) Press key. Sewing LED lights up to enter
the combination mode.
C1 to C20 can be selected with or
key.
4) Press key, and then press key.
P1 is set to the first pattern of C1. P1 to P50
can be selected with or key as well.
5) Press key, and then press key.
P2 is set to the second pattern of C1. P1 to P50
can be selected with or key as well.
6) Press key, and then press key.
P3 is set to the third pattern of C1. P1 to P50
can be selected with or key as well.
7) Press key to finalize the register.
8) Press key.
Combination register mode is finalized.
9) Press key.
Mode setting is finalized and the mode returns
to the normal mode.
e
e
e
e
e
e
e
e
e
–
–
–
To Next Page
Loading...
Need help?
General
