− 38 −
Three figures from
the top are memory
switch Nos.
Two figures from the
bottom are contents
of setting.
2. Example of the memory switch setting
(1) Setting the max. sewing speed limitation
Setting example : Setting the max. sewing speed limitation to 1,800 rpm
1) Press key in the state that the sewing LED
is put out.
The memory switch is started and the contents
of memory switch No. 1 are indicated.
It is not necessary to change the sewing speed
since the max. speed limitation of the sewing
machine is set with memory switch No. 1. The
indicated memory switch No. can be changed
over with or key.
[8] HOW TO USE THE MEMORY SWITCH
The sewing machine operation can be changed by changing the setting of the memory switch.
1. Start and change of the memory switch
1) When key is pressed in the state that the
sewing LED is put out, the memory switch
setting mode is obtained.
2) Change the memory switch No. with or
key.
3) Adjust the memory switch No. to the No. you
desire to change, and press key. The
sewing LED lights up.
4) Change the contents of the memory switch with
or key.
5) The value can be returned to the value at the time of delivery from the factory with key.
6) Press key to register the contents of change. Sewing LED goes off and the mode returns to the
selective state of the memory switch No.
7) Press key to finalize the memory switch setting mode and the mode returns to the normal mode.
1.30 which is indicated when "M" key is pressed
indicates that the max. speed limitation of the
first memory switch is 3,000 rpm. (State at the
time of delivery from the factory)
e
e
e
e
To Next Page
Loading...
Need help?
General
