– 16 –
❺
❺
❺
[Fig. 2 Handwheel cover sensor]
[Wiring the handwheel cover sensor cord]
Connect the connectors in the following order refer-
ring to Figs. 1 and 2.
1) Pass handwheel cover sensor cord
❺
through
the hole in table.
2) Connect the connector CN*1
of protective
cover sensor cable
❸
to the connector
of
handwheel cover sensor cord
❺
.
3) Secure handwheel cover sensor cord
❺
to the
handwheel cover with a cable clip band
.
Refer to
"2-15-2. Handling the cords com-
ing from the control box for stitch skipping
detecting device" p.18
for how to handle the
excess cord.
To Next Page
Loading...
Need help?
General
