Maintenance
Daily or monthly maintenance activities
5.7 Daily or monthly maintenance activities
5.7.1 Inspecting engine overall condition — SL000
Previous tasks
Make sure that the following preconditions are met:
q Preparatory maintenance activities are fulfilled. (For more information see: 5.5 Preparatory
maintenance activities, page 98.)
Specific safety instructions
Not applicable.
Consumables and equipment
Not applicable.
Visual inspection
Carry out a visual inspection of the engine, ducts, and hoses in order to:
– Search for possible leaks.
– Eliminate the risk of contamination.
– Search for loose components.
– Prevent engine damage.
The lines and hoses must be free of the following defects:
– Damage to the outer layer (for example: scratches, cuts, and tears)
– Embrittlement of the outer layer (for example: crack formation in the material)
– Deformation of the hose or line, taking into account depressurized and pressurized condi‐
tions of the hose or line, as well as bends (for example: delamination, blister formation)
– Leaks
– Failure to comply with the installation requirements
– Damage or deformation to fittings
– Dislocation of hoses from fittings
– Corrosion on fittings
u Inspect all the points shown in the pictures below.
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
101
To Next Page
Loading...
Need help?
General
