Maintenance
Post maintenance activities
5.6 Post maintenance activities
5.6.1 Spray painting
Specific safety instructions
DANGER
Fire or explosion by flammable and explosive chemical products.
Burns or explosion release will result in death or serious injury.
u Avoid any contact of flammable and explosive chemical products with any hot surface or
ignition source.
u Lock out and tag out the engine prior to carrying out paint works on it.
u Ensure a good ventilation while carrying out paint works on the engine.
u Smoking and open flames are forbidden in the vicinity of the engine.
WARNING
Risk of injuries by contact with or inhalation of chemical products.
Contact with or inhalation of chemical products could result in death or serious injuries by
intoxication or poisoning.
u Wear proper personal protective equipment.
u Refer to the local regulations and the product associated data to safely handle, store, and
use these products.
WARNING
Risk of injuries by explosion of pressurized container.
Explosion of pressurized container could result in death or serious injuries.
u Do not pierce or burn the pressurized container, even after use.
u Protect the pressurized container from sunlight.
u Make sure the pressurized contained is not exposed to temperatures over 50 °C (122 °F).
Scope
Spray painting may be necessary in the following cases:
– Touch-ups following damage to the original paint
– Painting of spare parts delivered unpainted
Previous tasks
q Make sure that the surface to be painted is clean and free of grease, dust, and debris.
q Make sure that the spray paint can is at ambient temperature.
q Make sure that all areas not to be painted are masked.
Consumables and equipment
– Spray paint can - black color (12692707)
– Rags
– Cleaner
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
99
To Next Page
Loading...
Need help?
General
