Safety
Identification of the warnings
2 Safety
2.1 Identification of the warnings
2.1.1 Warnings
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injuries or death.
Tab. 8: Example of warning
The safety alert symbol always appears in connection with one of the signal words:
– DANGER
– WARNING
– CAUTION
DANGER
Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
WARNING Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
Tab. 9: Warning signs
The NOTICE signal word indicates a risk not related to personal injury.
The risks of engine failure are classified according to ISO 2710-2:
– Critical failure: that may cause engine scrap or breaking the laws or regulations
– Major failure: that causes remarkable degradation of engine performance or operating fault
of main components, and cannot be repaired by replacing the part with spare with common
tools in a short time
– Minor failure: that affects the performance of the engine, but does not cause operating fault
of main components, and can be repaired by replacing the part with spare with common
tools, usually in a short time
The short time is generally 30 minutes.
2.1.2 Additional identifications
Note Indicates helpful advice and tips.
32
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
Need help?
General
