Maintenance
Cooling system
5.10 Cooling system
5.10.1 Collecting coolant sample — SL120
See the generator set manual for more details.
5.10.2 Replacing coolant — SL116
Draining coolant
Make sure that the following preconditions are met:
q Preparatory maintenance activities are fulfilled. (For more information see: 5.5 Preparatory
maintenance activities, page 98.)
q A container with the required capacity is ready.
q A suitable drainage container is available.
q Required quantity of approved coolant is available. (For more information see: 5.14 Lubri‐
cants and operating fluids, page 141.)
DANGER
Hazards by ejection of hot operating fluids or filler cap.
Hot fluid spray from a pressurized cooling system will result in death or serious injury by burns.
Filler cap ejected by operating fluid under pressure will result in death or serious injury by
impact.
u Only perform maintenance and inspection work on the cooling system when the engine has
cooled down to ambient temperature.
u Wear proper personal protective equipment.
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
123
To Next Page
Loading...
Need help?
General
