Safety
Accessible areas
9. Completing the activity that required the lockout/tagout process to be started.
10. Making sure that all tools and items have been removed before removing lockout/tagout
devices.
DANGER
Failure to observe safety notes!
Risk of death or injury.
u Observe local regulations, site rules, and safety notes.
u In doubt, immediately seek advice from a competent person (for example, safety officer,
supervisor).
2.8.4
Emergency stop
Information
The machinery owner is responsible for marking the hazardous areas and the fail-safe devices.
The emergency stops must withstand the operational conditions, be kept visible and legible
during the entire life cycle.
Additional emergency stops and measures according to project standards and local regulations
and standards are possible.
The emergency stop button and signals, as the acknowledge buttons are described in the
generator set manual.
NOTICE
Property damage by misuse of emergency stops.
Misusing the emergency stops to stop the engine could lead to property damage.
u Initiate an emergency stop only in emergency situations.
Initiating an emergency stop:
u Press the emergency stop button.
After an emergency stop:
u Remedy to the emergency situation.
u Acknowledge the emergency stop button and signals.
2.8.5 Signage recommendations
Information
The machinery owner is responsible for marking the hazardous areas and the fail-safe devices.
The signs must withstand the ambient conditions, and be kept visible and legible during the
entire life cycle.
Additional signs and measures according to project standards and local regulations and stand‐
ards are possible. For example: the signs for the United States market shall comply with ANSI
Z535.4.
The following warning signs must be clearly visible and mounted in the accessible areas:
48
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
Need help?
General
