Kohler KD62V12 Operation And Maintenance Manual

Maintenance
Lubricating system
Fig. 56: Example of oil dipstick — oil filler neck
1
Dipstick 2 Oil filler neck
Information
Depending on application, some dipsticks have markings ("stopped" / "started").
Check the oil level on the "stopped" side.
u Pull out dipstick 1, wipe with clean cloth and re-insert as far as it goes.
u Pull the oil dipstick again and determine the oil level.
w
The oil level must be between the “min.” and “max.” marks on the dipstick.
If the oil level is too low:
u Remove oil filling cap.
u Replenish oil via the oil filler neck 2.
u Do not replenish Diesel engine with oil over the “max.” mark.
u Clean filling cap and close the filler neck.
5.9.4 Changing oil filters — SL101
q Preparatory maintenance activities are fulfilled. (For more information see: 5.5 Preparatory
maintenance activities, page 98.) .
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
113

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English