OPERATION DETAILED CONTROLS AND GAUGES
3-85
DOOR LOCK 3
WARNING
q Before the releasing the door lock, always stop the machine on flat ground.
q Never release the door lock on a slope. The door may suddenly close and cause injury.
q When releasing the door lock, do not extend your body or hands outside the machine and do not put
your hands on the door frame. The door may suddenly close and cause injury.
Use the door lock to fix the door in position after opening it.
1. Push the door against catch (1) to lock it in position.
2. When closing the door, push down the lever (2) on the left
of the operator's seat to release the catch.
3. When attaching the door in position, lock it firmly to the
catch.
CAP WITH LOCK 3
Use the starting switch key to open and close the locks on the caps and covers.
For details of the locations of the caps and covers with locks, see “LOCKING (3-168)“.
Insert the key as far as it will go to the shoulder (A). If the key is
turned before it is inserted all the way, it may break.
To Next Page
Loading...
Need help?
General
