OPERATION TRANSPORTATION
3-173
10. When the machine travels over the rear wheels of the
trailer, it becomes unstable, drive slowly and carefully.
(Never operate the steering.)
11. At the moment the machine passes the rear wheels, it tilts
forward, be careful not to let the work equipment hit the
trailer body. Drive the machine forward to the specified
position, then stop the machine.
12. Lower the work equipment on top of wooden blocks.
Securing Machine 3
NOTICE
q Stow the antenna and reassemble the mirrors so that they are within the width of the machine.
q To prevent damage to the bucket cylinder during transportation, fit a wooden block at one end of the
bucket cylinder to prevent it from touching the floor.
Load the machine onto a trailer as follows:
1. Extend the bucket and arm cylinders fully, then lower the
boom slowly.
2. Set the lock lever securely to the LOCK position (L).
3. Stop the engine, then remove the key from the starting
switch.
4. Close all doors, windows, and covers.
Lock the covers, caps, and doors fitted with locks.
To Next Page
Loading...
Need help?
General
