MAINTENANCE MAINTENANCE PROCEDURE
4-81
CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUB-
BER 4
Check visually and touch with your fingers to check that there are no loose bolts or hardening of rubber parts at
clamps (1) to (15). If there is any looseness or hardened rubber, contact your Komatsu distributor for replace-
ment.
CHECK FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4
Check for any missing fuel spray prevention caps (1) to (11) or fuel spray prevention cover (12), and check also
for any hardened rubber portions. If there are any missing caps or cover or the rubber is hardened, please con-
tact your Komatsu distributor for repairs.
To Next Page
Loading...
Need help?
General
