SAFETY 2.1 SAFETY INSTRUCTIONS
25
2.1.7 TRANSPORTING AND TOWING -RECOMMISSIONING
● The machine must be towed, loaded and transported only in
accordance with the Operation,- Lubrication and Maintenance
Manual.
● For towing the machine observe the prescribed transport
position, admissible speed and itinerary.
● Use only appropriate means of transport and lifting gear of
adequate capacity.
● The recommissioning procedure must be strictly in accor-
dance with the Operation,- Lubrication and Maintenance
Manual.
2.1.8 SPECIAL SAFETY EQUIPMENT
SAFETY HARNESS IN CONFORMITY WITH EN 361
(EUROPEAN STANDARD)
The safety harness should only be used together with connectors
according to
EN 354, and fall arrest according to EN 355, or fall protection
devices according to EN 360.
Refer to page page 29 in this section for more informa-
tion.
FALLING-OBJECT PROTECTIVE STRUCTURE
”FOPS” FOR OPERATOR’S CAB.
The Shovel must be equipped with a falling object protective
structure ”FOPS” if it is used for applications where there is a risk
of falling material.
The ”FOPS” structure shall comply with EN 474.
FRONT GUARD PROTECTIVE STRUCTURE
”FGPS” FOR OPERATOR’S CAB
The Shovel must be equipped with a front guard protective struc-
ture ”FGPS” if it is used for applications where there is a risk of
hitting objects from the front.
OBJECT HANDLING
Object handling operations are not allowed. If the Shovel is used
for object handling applications it must be equipped with the
respective safety devices.
To Next Page
Loading...
Need help?
General
