MAINTENANCE PRIOR TO START
7-27
CHECKING THE FUEL LEVEL, REFUELING
• Danger of fire! Fuel that has spilled over may ignite!
Immediately remove fuel that has spilled over.
1. Turn the start switch to the operating position 'I' and check
the fuel level indicated on the fuel level indicator.
2. Then, return the start switch to the stop position '0'.
3. If required, refuel via the filler (1).
For detailed information on fuels, see section "Lubricants
and Operating Agents".
4. After refueling, firmly close the filler.
P
I
II
0
75_209
1
75_211
A - fuel tank full
B - fuel tank half-full
To Next Page
Loading...
Need help?
General
