ALS-ELECTRONICS
9-3
OPERATION OF THE ALS-ELECTRONICS
SWITCHING ON THE ALS-ELECTRONICS
1. Precondition:
Speed range No. 2 must be switched on in order to ensure
that the ALS system can be activated.
Todothis,pressthe"Drivingrangeupto20km/h"button.
2. Press the ALS-Electronics switch. The green control lamp in
the switch lights up.
If the machine drives faster than 5 k.p.h., the ALS-Electron-
ics is automatically activated and the ALS-Electronics con-
trol lamp lights up on the dash panel. If the machine drives
slower than 5 k.p.h., the ALS-Electronics is switched off and
the control lamp on the dash panel goes out. However, the
control lamp in the ALS-Electronics switch remains lit in
green.
☞
• To ensure that the ALS system can remain fully effective
when the machine is underway, do not tilt the bucket all
the way through till it touches the limit stops.
• Do not support the boom when on the road.
SWITCHING OFF THE ALS-ELECTRONICS
Press the ALS-Electronics switch. The control lamp in the switch
goes out.
ALS_1
To Next Page
Loading...
Need help?
General
