RUNNING GEAR OPERATION
Operating instructions • Load Carrier • 505410638-02 • 07/2019
45
Fig.5-31: Aluminium ladder
1 Aluminium ladder
2 Bracket
3 Lynch pin
Using the aluminium ladder
► Remove the lynch pin.
► Pull out the ladder.
► Position the ladder.
ü The ladder can be used to climb onto
or off the vehicle.
Slide in and secure the aluminium lad-
der
► Slide in the ladder over the brackets.
► Secure the ladder with the lynch pins.
ü The ladder is inserted and secured.
5.13.3 Folding telescopic ladder
WARNING
Risk of accident caused by an unse-
cured telescopic ladder!
An unsecured telescopic ladder can swing
onto the road while driving and cause an
accident.
► Prior to departure, check that the tele-
scopic ladder is properly secured.
KRONE trailers can be equipped with a
folding telescopic ladder at the rear.
Fig.5-32: Folding telescopic ladder
1 Handle
Using the telescopic ladder
► Lift the telescopic ladder past its lock.
► Pull out the telescopic ladder com-
pletely by its handle.
Fig.5-33: Folding telescopic ladder in the
function position
1 Handle
► Move the telescopic ladder to the func-
tion position.
ü The telescopic ladder can be used to
climb onto or off the vehicle.
Sliding in and securing the telescopic
ladder
► Slide in the telescopic ladder com-
pletely using the handle.