7 COMBINATION INSTRUMENT
32
7.19.9 Telephony (optional)
V01183-01
Condition
• Function KTM MY RIDE activated (optional).
• Bluetooth
®
function is activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
• Headset linked with appropriate cellphone.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the SET button to accept an incoming call.
Info
This function is only available if the vehicle has
Bluetooth
®
hardware.
– Press the BACK button to reject an incoming call.
Info
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
7.19.10 General Info
V01166-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until General Info is marked.
Press the SET button to open the menu.
Date shows the date.
ODO shows the total distance covered.
Battery indicates the battery voltage.
7.19.11 Trip 1
E01062-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until Trip 1 is marked. Press
the SET button to open the menu.
Trip shows the distance since the last reset, such as between two
refueling stops. Trip is running and counts up to 9999.
ØCons indicates the average fuel consumption based on Trip.
ØSpeed indicates the average speed based on Trip and Trip Time.
Trip Time shows the journey time on the basis of Trip and runs as
soon as a speed signal is received.
Fuel Range indicates the possible distance you can cover with the
fuel reserve.
To Next Page
Loading...
Need help?
General
