ELECTRICAL SYSTEM 16
89
M00729-10
Main work
– Connect a battery charger to the 12-V battery. Switch on the
battery charger.
Battery charger (58429074000)
In addition, this battery charger can be used to test the open-
circuit voltage, the starting ability of the 12-V battery, and
the alternator. It is impossible to overcharge the 12-V battery
using this device.
Info
Never remove cover
1
.
Charge the 12-V battery to a maximum of 10 % of the
capacity specified on battery housing
2
.
– Switch off the battery charger after charging and disconnect
from the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
– Position the negative cable and mount and tighten the screw.
– Position the negative terminal cover.
Finishing work
– Mount the front rider's seat. ( p. 64)
– Mount the passenger seat. ( p. 63)
– Set time and date. ( p. 37)
16.4 Changing the main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. The main fuse is under the seat.
Preparatory work
– Remove the passenger seat. ( p. 63)
– Remove the front rider's seat. ( p. 64)
To Next Page
Loading...
Need help?
General
