KTM 85 SX 19/16 2017 User Manual

11 SERVICE WORK ON THE CHASSIS 42
Preparatory work
– Remove the air filter box cover. ( p. 41)
– Remove the air filter. ( p. 41)
L00944-10
Main work
– Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaner ( p. 89)
Info
Only squeeze the air filter to dry it; never wring it out.
– Oil the dry air filter with a high quality filter oil.
Oil for foam air filter ( p. 89)
– Clean the air filter box.
– Check the intake flange for damage and looseness.
Finishing work
– Install the air filter. ( p. 42)
– Install the air filter box cover. ( p. 41)
11.26 Installing the air filter
L00943-10
Main work
– Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area

.
Long-life grease ( p. 89)
H01372-10
–
Put in both parts together, position them and fix them with air filter holder

.
The arrow of the UP marking points upward.
Info
If the air filter is not correctly mounted, dust and dirt can enter the engine
and cause damage.
Finishing work
– Install the air filter box cover. ( p. 41)
11.27 Sealing the air filter box
Preparatory work
– Remove the air filter box cover. ( p. 41)
M01081-10
Main work
–
Seal the air filter box in marked area

.
Finishing work
– Install the air filter box cover. ( p. 41)

KTM 85 SX 19/16 2017 Specifications

General

Engine Type	1-cylinder, 2-stroke engine
Displacement	84.9 cm³
Starter	Kickstarter
Transmission	6-speed
Clutch	Wet, multi-disc clutch, Formula hydraulics
Front Wheel	1.60 x 19"
Rear Wheel	2.15 x 16"
Seat Height	890 mm
Cooling System	Liquid cooled
Bore x Stroke	47 mm x 48.95 mm
Frame	Central tube frame, chrome molybdenum steel
Front Suspension	WP upside-down Ø 43 mm
Rear Suspension	WP monoshock
Front Brake	Disc brake
Rear Brake	Disc brake
Wheelbase	1, 290 mm ± 10 mm
Tank Capacity	5.2 liters