WHEELS, TIRES 15
205
Guideline
Screw, wheel speed
sensor
M6 6 Nm (4.4 lbf ft)
– Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
– Check the chain tension. ( p. 171)
– Remove the rear of the motorcycle from the lifting gear.
( p. 158)
15.5 Checking the rear hub damping rubber pieces
Info
The engine power is transmitted from the rear sprocket to the rear wheel via the 6 damping rubber pieces.
They eventually wear out during operation. If the damping rubber pieces are not changed in time, the rear
sprocket carrier and the rear hub will be damaged.
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 158)
– Remove the rear wheel. ( p. 199)
To Next Page
Loading...
Need help?
General
