Kubota BX261D User Manual

(1) Speed control pedal (2) Speed set rod
9.1 How to use the speed set device
To engage the speed set device
1. Accelerate the engine speed to desired level using
the speed-control-pedal.
2. Push and hold the speed-set-rod downward to on
position.
3. Release the speed-control-pedal.
4. Release the speed-set-rod.
Desired engine speed will be maintained.
To disengage the speed set device
1. Depress the brake pedal.
IMPORTANT :
• To prevent the damage of the speed-set-device,
do not depress the reverse pedal when the
speed-set-device is engaged.
NOTE :
• If you step on the speed-control-pedal on the
forward acceleration side, the speed-set-device
will disengage.
• The speed-set-device will not operate in
reverse.
(1) Speed control pedal
(2) Speed set rod
(A) On
(B) Off
ACCESSORY
1. 12 V electric power socket
You may use the 12 V electric power socket to connect
an auxiliary light or other devices.
IMPORTANT :
• Do not use as a cigarette lighter.
• Do not use when wet.
NOTE :
• Do not connect a light or other device that
draws more than 120 watts to 12 V electric
power socket. The battery may discharge very
rapidly or the 12 V electric power socket may
fail.
(1) 12V electric power socket
INSTRUMENT PANEL AND CONTROLS FOOT AND HAND CONTROLS
36
BX231D

Kubota BX261D Specifications

General

Brand	Kubota
Model	BX261D
Category	Tractor
Language	English