Kubota WSM STV32 User Manual

STV32 · STV36 · STV40, WSM GENERAL
G-30
[7] CHECK POINTS OF EVERY 600 HOURS
Adjusting Front Axle Pivot
1. Loosen the lock nut (2), tighten the adjusting screw (1) all the
way, and then loosen the adjusting screw (1) by 1/6 turn.
2. Retighten the lock nut (2).
A If the axle pivot pin adjustment is not correct, front wheel
vibration can occur causing vibration in the steering
wheel.
Refer to "FRONT AXLE" section for details.
[8] CHECK POINTS OF EVERY 800 HOURS
Checking Valve Clearance
1. See page 1-S13.
[9] CHECK POINTS OF EVERY 1 YEAR
Replacing Air Cleaner Element (Primary) and Secondary Element
1. See page G-21.
[10]CHECK POINTS OF EVERY 2 YEARS
Replacing Radiator Hose (Water Pipes)
1. Replace the hoses and clamps.
Refer to "Checking Radiator Hose and Hose Clamp" (See
page G-27.)
Replacing Fuel Hose
1. Replace the fuel hoses and clamps, if necessary.
Refer to "Checking Fuel Line" (See page G-22.)
Replacing Power Steering Hose
1. Replace the hoses and clamps.
Refer to "Checking HST Oil Line and Power Steering Hose"
(See page G-28.)
Replacing HST Oil Line
1. Replace the hoses and clamps.
Refer to "Checking HST Oil Line and Power Steering Hose"
(See page G-28.)
(1) Adjusting Screw (2) Lock Nut
0000007995E
0000007996E
0000007997E
0000007998E
0000007999E
0000008000E
0000008001E
KiSC issued 04, 2006 A

Kubota WSM STV32 Specifications

General

Brand	Kubota
Model	WSM STV32
Category	Tractor
Language	English