3. INSPECTION/ADJUSTMENT
3-4
SUPER8 50
AIR CLEANER
AIR CLEANER REPLACEMENT
Remove the air cleaner case cover screws and
the cover by removing the six screws.
Remove the air cleaner element by removing
the four screws.
Check the element and replace it if it is
excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
SPARK PLUG
Remove the spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug:
CHAMPION-P-RZ9HC
NGK CR7HSA
Measure the spark plug gap.
Spark Plug Gap: 0.6Д0.7mm
Cracks
Damage
Gap, Wear, and
Fouling Deposits
xThe air cleaner element has a viscous
type paper element. Do not clean it
with any fluid.
xBe sure to install the air cleaner
element and cover securely.
＊
When installing, first screw in the spar
plug by hand and then tighten it with a
spark plug wrench.
＊
Screws
Air Cleaner Case Cove
Air Cleaner Elemen
Washe
Deformation
Cortesia de / Courtesy of: www.batmotos.com
Recambios KYMCO en www.batmotos.com
To Next Page
Loading...
Need help?
General