KYMCO agility R16 150 Service Manual

7. CYLINDER HEAD/VALVES
7-10
AGILITY CITY 125
CAMSHAFT INSTALLATION
Turn the flywheel so that the “T” mark on the
flywheel aligns with the index mark on the
crankcase.
Keep the round hole on the camshaft gear
facing up and align the punch marks on the
camshaft gear with the cylinder head surface
(Position the intake and exhaust cam lobes
down.) and install the camshaft onto the
cylinder head.
Install the cam chain over the camshaft gear.
Install the dowel pins.
Install the camshaft holder, washers and nuts
on the cylinder head.
Tighten the four cylinder head nuts and two
bolts.
Torque: Cylinder head nut: 2.0kg-m
Adjust the valve clearance.
Turn the cam chain tensioner screw counter-
clockwise to release it.
Dowel Pins
N
u
t
Washe
r
Punch Marks
Cam Chain
Round Hole
Tensioner Screw
Camshaft Gea
r
Camshaft Holde
r
xApply engine oil to the threads of the
cylinder head nuts.
xDiagonally tighten the cylinder head
nuts in 2Д3 times.
°
Cortesia de / Courtesy of: www.batmotos.com
Recambios KYMCO en www.batmotos.com

KYMCO agility R16 150 Specifications

General

Brand	KYMCO
Model	agility R16 150
Category	Scooter
Language	English