PEOPLE S 4T
PREFACE
This Service Manual describes the
technical features and servicing
procedures for the KYMCO People S
50/125/200 4 STROKE.
Section 1 contains the precautions
for all operations stated in this
manual. Read them carefully before
any operation is started.
Section 2 is the removal/installation
procedures for the frame covers which
are subject to higher
removal/installation frequency during
maintenance and servicing
operations.
Section 3 describes the inspection/
adjustment procedures, safety rules
and service information for each part,
starting from periodic maintenance.
Sections 6 through 11 give
instructions for disassembly, assembly
and adjustment of engine parts.
Section 12 is the removal/ installation
of chassis. Section 14 states the
testing and measuring methods of
electrical equipment. Section 18
provides the maintenance instructions
of the exhaust emission control
system.
Most sections start with an assembly
or system illustration and
troubleshooting for the section. The
subsequent pages give detailed
procedures for the section.
KWANG YANG MOTOR CO., LTD.
OVERSEAS SALES DEPARTMENT
OVERSEAS SERVICE SECTION
TABLE OF CONTENTS
GENERAL INFORMATION
1
EXHAUST MUFFLER/FRAME COVERS
2
INSPECTION/ADJUSTMENT
3
LUBRICATION SYSTEM
4
FUEL SYSTEM
5
ENGINE REMOVAL/INSTALLATION
6
CYLINDER HEAD/VALVES
7
CYLINDER/PISTON
8
DRIVE AND DRIVEN PULLEYS/KICK
STARTER
9
FINAL REDUCTION
10
CRANKCASE/CRANKSHAFT
11
STEERING HANDLEBAR/FRONT
WHEEL/FRONT BRAKE/FRONT
SHOCK ABSORBER/FRONT FORK
12
REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER`
13
BATTERY/CHARGING SYSTEM
A.C. GENERATOR
14
IGNITION SYSTEM
15
STARTING SYSTEM
16
LIGHTS/
INSTRUMENTS
SWITCHES
17
E/M
EXHAUST EMISSION CONTROL
SYSTEM
18
The information and contents included in
this manual may be different from the
motorcycle in case specifications are
changed.
CHASSIS
ELECTRICAL EQUIPMENT
ENGINE
To Next Page
Loading...
Need help?
General
