KYMCO PEOPLE S 125 Service Manual

3. INSPECTION/ADJUSTMENT
3-7
PEOPLE S 4T
FINAL REDUCTION GEAR OIL
OIL LEVEL CHECK
Stop the engine and remove the oil check bolt.
The oil level shall be at the oil check bolt hole.
If the oil level is low, add the recommended
oil to the proper level.
Recommended Oil:
GEAR OIL VISCOSITY SAE90#
Install the oil check bolt.
OIL CHANGE
Remove the oil check bolt.
Remove the oil drain bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 1.0kg-m
Fill with the recommended oil.
Oil Capacity: At disassembly : 210cc
At change : 180cc
Oil Capacity: At disassembly : 50cc 120cc
At change : 50cc 90cc
Reinstall the oil check bolt and check for oil
leaks.
Torque: 1.2kg-m
DRIVE BELT
Remove the left crankcase cover. (
Ö
9-3)
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if ne-
cessary and in accordance with the Mainte-
nance Schedule.
Drive Belt
Oil Check Bolt
Place the motorcycle on its main stand
on level ground for oil level check.
＊
Sealing Washe
r
Make sure that the sealing washer is in
good condition.
＊
Make sure that the sealing washer is in
good condition.
＊
Oil Check Bolt Hole
Oil Drain Bolt

KYMCO PEOPLE S 125 Specifications

General

Displacement	124.6 cc
Front Suspension	Telescopic Fork
Cooling System	Air Cooled
Max Torque	10.4 Nm @ 6500 rpm
Transmission	CVT
Front Brake	Disc