KYMCO PEOPLE S 125 Service Manual

5. FUEL SYSTEM
5-10
PEOPLE S 4T
FLOAT LEVEL INSPECTION
Measure the float level.
Float Level: 19.0mm
50cc: 17.0mm
Float Level Gauge
CARBURETOR INSTALLATION
Tighten the drain screw.
Install the carburetor onto the intake manifold,
aligning the tab on the carburetor with the
cutout in the intake manifold. Tighten the
band screw.
Install the air cleaner connecting tube and
tighten the band screw.
Connect the throttle cable to the throttle
wheel on the carburetor.
Connect the fuel tube and vacuum tube to the
carburetor.
Connect the auto bystarter wire connector.
Perform the following inspections and
adjustments:
-Throttle grip free play (
Ö
3-3)
-Carburetor idle speed (
Ö
3-6)
Special
A
uto Bystarter Wire Connecto
r
Vacuum
Connecting Tube Band
Throttle Cable
• Check the operation of the float valve
and float before float level inspection.
• Measure the float level by placing the
float level gauge on the float chamber
face parallel with the main jet.
＊
Float Level Gauge

KYMCO PEOPLE S 125 Specifications

General

Displacement	124.6 cc
Front Suspension	Telescopic Fork
Cooling System	Air Cooled
Max Torque	10.4 Nm @ 6500 rpm
Transmission	CVT
Front Brake	Disc