Lexmark Optra T User Manual

PJL
3-45
Common Variables for PCL Emulation
Note: The word common applies to those variables common to both your printer
and the Hewlett-Packard Company’s LaserJet printers.
Use these variables only for PCL emulation. The
[command modifier:value]
parameter should be specified as LPARM:PCL. For example:
@PJL SET LPARM:PCL FONTSOURCE=I<CR><LF>
To determine which variables your printer supports, see Table B-3: “Common
Variables for PCL Emulation” on page B-11.
Table 3-5: Common Variables for PCL Emulation
Variable Function Selections Factory Default
FONTNUMBER Font Number 0, 1, .... n 0
FONTSOURCE Font Source I, S, M1, M2, M3, M4, D1
I Internal font source
S Permanent download fonts
M1, M2,
M3, M4 Flash font source
D1 Disk font source
All other values default to internal font source.
I
PITCH Default pitch
(fixed-pitch fonts)
0.08 to 100 (in increments of 0.01)
Note: If an invalid pitch is requested, the printer
selects the closest pitch.
10.00
PTSIZE Default point size
(proportional
spaced fonts)
1 to 1008 (in increments of 0.25)
Note: If an invalid point size is requested, the
printer selects the closest point size.
12.00
SYMSET Symbol set for the
default font
For a list of the values for Optra Color 45,
Optra Color 1200, Optra E310, and Optra E312,
see Table 2-8 “Key 26 PCL Emulation Symbol
Sets” on page 2-14 and Table 2-9 “Additional
PCL Emulation Symbol Sets” on page 2-17.
Note: For a list of values for Optra C710, Optra
M410, Optra M412, Optra T family, and Optra
W810, see Table 2-15 “Symbol Set Support for
PCL Emulation Text Fonts” on page 2-29 and
Table 2 - 16 “ Non- Tex t P C L E m ulat i on S ymb o l
Sets” on page 2-31. If a symbol set is requested
that is not resident in the printer, the symbol set
is not changed.
PC-8, PC850
(Country specific)

Lexmark Optra T Specifications

General

Brand	Lexmark
Model	Optra T
Category	Printer
Language	English