Lexmark Optra T User Manual

PJL
3-59
Status Message Format
The format of the returned information from the INFO STATUS, USTATUS DEVICE,
and USTATUS TIMED commands is described in this section.
Information Messages
Information messages are returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
Table 3-12: PJL Information Messages
Printer State Status Code Display String Online Status
Ready 10001 Ready TRUE
Ready 10001 RDYMSG TRUE
Not Ready 10002 Not Ready FALSE
In the Menus 10002 Not Ready FALSE
Printer reset 10005 Resetting the Printer FALSE
Ready with Toner Low 10006 88 Toner Low TRUE
Ready with Toner Low 10006 88 Yellow Toner Low TRUE
Ready with Toner Low 10006 88 Magenta Toner Low TRUE
Ready with Toner Low 10006 88 Cyan Toner Low TRUE
Ready with Toner Low 10006 88 Black Toner Low TRUE
Ready with Toner Low 10006 88 Color Print Cartridge Low TRUE
Ready with Toner Low 10006 88 Black Print Cartridge Low TRUE
Ready with Toner Low 10006 88 Photo Print Cartridge Low TRUE
Ready with Replace Toner 10006 Replace Toner TRUE
Ready with Replace PC Kit 10006 Replace PC Kit TRUE
Ready with Replace Fuser 10006 Replace Fuser TRUE
Ready with Replace Transfer 10006 Replace Transfer TRUE
x represents an input source code. For more information on input source codes, see Table 3-16 “Tray Codes” on page 3-69.
yy represents a size code. For more information on size codes, see Table 3-17 “Media Size Codes” on page 3-69.
ww represents the bin code. For more information on bin codes, see Table 3-18 “Output Bin Codes” on page 3-70.
Note: The Display String is returned in the current language. A display message longer than one line shows only the first line
of the message.

Lexmark Optra T Specifications

General

Brand	Lexmark
Model	Optra T
Category	Printer
Language	English