Lexmark Optra T User Manual

PostScript
4-25
Envelope Size Support
The literal names in Table 4-11 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source.
Therefore, when these operators are used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the
following PostScript emulation sequence. The following example uses a 3.875 x 7.5
envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Table 4-11: Envelope Sizes Supported
✓ Supported
✘ Not Supported
Envelope Sizes
Printer Model
Literal Name Size (mm) Size (inches) Size (points)
Optra Color 45 Optra Color 1200 Optra E310, E312 Optra C710 Optra M410, M412 Optra T610 Optra T612 Optra T614 Optra T616 Optra W810
3.875x7.5envelope 98.4 x 190.5 3.875 x 7.5 [279 540]
✓✓✓✓✓✓✓✓✓
✘
3.875x8.875envelope 98.4 x 225.4 3.875 x 8.875 [279 639]
✓✓✓✓✓✓✓✓✓
✘
4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 [297 684]
✓✓✓✓✓✓✓✓✓
✘
110x220envelope 110 x 220 4.33 x 8.66 [312 624]
✓✓✓✓✓✓✓✓✓
✘
162x229envelope 162 x 229 6.38 x 9.01 [459 649]
✓✓✓✓✓✓✓✓✓
✘
176x250envelope 176 x 250 6.93 x 9.84 [499 708]
✓✓✓✓✓✓✓✓✓
✘
otherenvelope
1
Other [612 996]
✓✓✓✓✓✓✓✓✓
✘
1
For other envelopes, the page is formatted to 216 x 356 mm (8.5 x 14 in.) unless a size is specified by your software
application.

Lexmark Optra T Specifications

General

Brand	Lexmark
Model	Optra T
Category	Printer
Language	English