PJL
3-90
Unlocking a Protected File or Device for the Current Job
The file or device unlocked by the execution of this command is automatically
re-locked upon execution of the EOJ command or by a printer language change.
Syntax:
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LRWLOCKJ = "password"[<CR>]<LF>
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LWLOCKJ = "password"[<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "device:filename.filetype"are:
device flash, flash1, disk,ordisk1 (case insensitive)
filename A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
filename is case
sensitive.
filetype An identifier that categorizes the file, such as p5macro for PCL
macros or
p5symset for PCL symbol sets. See the table
beginning on page 3-80 for a complete list of the supported file
types. The
filetype is case sensitive.
LRWLOCK = "password" or LWLOCK = "password" Parameters
See “Printer Unique LRESOURCE Variables” on page 3-49 for information about
values for
LRWLOCK = "password" and LWLOCK = "password" parameters.
To Next Page
Loading...
Need help?
General