Lexmark Optra T User Manual

Memory
6-9
Accessing Files with PostScript Emulation
File Naming Conventions
For any PostScript emulation operator that requires a filename parameter, the
filename can be one of the following:
%device%filename
Specifically references a file on a particular device. If the filename does not exist
on %device%, no other %device% is accessed for a duplicate filename.
filename
Does not specifically reference a device. The following action occurs:
• For the PostScript emulation operator deletefile, only the first device in the
search order is checked for filename.
• For all other PostScript emulation operators, and all other combinations of
search order and available devices, each installed %device% is checked in
the search order for the existence of filename. The operator acts upon the first
filename that it finds.
Device Names
The term device refers to flash memory, disk, or ROM. For PostScript emulation, some
of the operators require or return device names. These operators are: deletefile,
filenameforall, devforall, devdismount, devmount, devformat, devstatus.The
device always begins and optionally ends with a % character. The following are the
valid device names:
%rom%
%flash%
%flash1%
%disk%
%disk1%
The same filename can exist on more than one device. The device prefix determines
the actual file to use. For example,
%rom%myfile and %flash%myfile designate,
respectively, a file called
myfile both on the ROM and on flash memory. The device
name distinguishes which file to use.

Lexmark Optra T Specifications

General

Brand	Lexmark
Model	Optra T
Category	Printer
Language	English