PJL
3-74
STMSG Command
When a STMSG command is received, the message appears and is allotted both lines
of the display. The printer is taken OFFLINE. This message, along with the OPMSG
command, is the lowest priority, so if another intervention occurs, it displays instead.
Note: Refer to your printer user documentation for information about how to return
your printer to the ONLINE state. Once in the ONLINE state, the
Ready, Busy,
or
Waiting message appears on the printer operator panel display or through
MarkVision.
A printer reset is not available from the printer operator panel or through MarkVision
while STMSG displays.
Syntax:
@PJL STMSG DISPLAY = "message"[<CR>]<LF>
To Next Page
Loading...
Need help?
General